An experimental study on the spray characteristics of pressure nozzle in a fluid bed granulation

The particles with a narrow size distribution are proper products in a fluid bed granulation and coating. As well, the process efficiency is one of the most important parameters, and the wall deposition of sprayed liquid reduces it. The modality of spray volume distribution is a key parameter in the definition of particle size distribution and process efficiency. This work is done in two steps: In the first step, an experimental study on spray characteristics including spray flux distribution, spray cone angle, and discharge coefficient is conducted. Based on the experimental data, the curves of liquid volume flux versus nozzle pressure and height are obtained. The results indicate that the flux distribution changes significantly with even small pressure and height changes. In the second step, the granulation process is carried out in a semi-industrial conical fluid bed, and the particles size distribution curves and the deposited mass on the bed wall are obtained. The results show that the precise determination of the spray flux distribution is an appropriate way to predict the well-advised nozzle pressure/height in order to achieve the narrow particle size distribution and high efficiency of the process.     

Engineering the Structure of Mesoporous Bioactive Glass Microspheres by the Surface Effect of Inverse Opal Templates and Temperature

The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub‐micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core–shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.     

Optimal interval type-2 fuzzy fractional order super twisting algorithm: A second order sliding mode controller for fully-actuated and under-actuated nonlinear systems

In this paper, a novel interval type-2 fuzzy fractional order super twisting algorithm (IT2FFOSTA) which is essentially a second order sliding mode controller is presented. The proposed IT2FFOSTA enhances fractional order super twisting algorithm (FOSTA) by taking advantage of an interval type-2 fuzzy fractional order sliding surface (IT2FFOSS) for some classes of fully-actuated and under-actuated nonlinear systems in presence of uncertainty. The FOSTA significantly reduces the amount of chattering and the IT2FFOSS results in decreasing the tracking error, control effort, and chattering level. In order to control under-actuated systems, a hierarchical sliding surface is employed. The multi-tracker optimization algorithm is utilized to adjust the controller’s parameters; this leads to an optimal performance for the IT2FFOSTA. To examine the performance of the IT2FFOSTA, some simulation and experimental tests on three examples of different classes of fully-actuated and under-actuated systems, including ball and plate, inverted pendulum, and ball and beam systems are carried out. The simulation and experimental results demonstrate the superiority of the IT2FFOSTA in reducing the amount of chattering, tracking error, and control effort compared to those of the other control methods.     

基于多视图立体视觉的沙堆三维尺寸测量研究

利用从运动中恢复结构方法(SFM),提出了一种基于多视图立体视觉的沙堆三维重建及三维尺寸测量方法。首先根据SFM方法的求解不稳定特点,结合光束平差法对SFM求解过程进行分析及优化;其次针对SFM重建结果为稀疏点云的问题,利用基于面片的稠密重建算法重新生成稠密的三维点云,再利用泊松算法对密集点云进行三维曲面重建;最后获得模型的三维尺寸信息。对某建筑工地的沙堆进行了三维尺寸的测量实验,实验结果验证了该方法的有效及可行性,提高了重建能力及精度,同时考虑了目标实际测量误差与重建误差,能够满足实际智能测量的应用需求。     

Temperature-responsive culture surfaces for insect cell sheets to fabricate a bioactuator

ABSTRACT

For the first time, we have fabricated insect-derived cell sheets by using temperature-responsive culture surfaces having a phase-transition temperature below 25°C. We prepared the temperature-responsive cell culture surfaces (tissue culture polystyrene, TCPS) by grafting a copolymeric gel consisting of hydrophobic N-tert-butylacrylamide (tBAAm) and N-isopropylacrylamide (IPAAm) units. First, to characterize the hydrophilic and hydrophobic properties of the copolymeric gel-grafted surfaces, static water contact angles of each surface were measured at various temperatures. By increasing the amount of tBAAm in the grafted copolymeric gel, the transition temperature of the gel was shifted to lower temperatures. At 25°C, the grafted copolymeric gel was dehydrated, and the insect-derived cells (AeAl2 cells) adhered on all the copolymeric gel-grafted surfaces. At 20°C, AeAl2 cells cannot adhere on the P(IPAAm-1.62tBAAm)-TCPS surface (the initial molar ratio of IPAAm and tBAAm (tBAAm?=?1.62 mol%)) better than on other surfaces (TCPS and tBAAm?=?4.88, 8.17 mol%). These two findings implied that the lower critical solution temperature of the copolymeric gel-grafted-TCPS existed from 20°C to 25°C. The laminin-coated P(IPAAm-1.62tBAAm)-TCPS surface showed temperature-dependent cell attachment and detachment properties, while AeAl2 cells were not detached from the extracellular matrix uncoated P(IPAAm-1.62tBAAm)-TCPS surface. AeAl2 cells and insect muscle cells were harvested as the respective sheets.     

STL模型特征信息的自适应分层的研究

模型的分层是3D打印前处理的一个重要环节，针对目前分层算法效率低、不能有效保留模型细微特征的问题，提出了一种新的基于STL模型特征信息的思想。首先提取模型的特征边，对特征边内实体表面采用区域增长算法进行表面分割，然后对分割后的表面判断其类型，最后对于不同的表面类型采用不同的分层求交处理算法。利用VC++6.0平台和OpenGL显示技术，依据模型表面几何特征自适应地变动层厚，减小台阶效应，加快分层效率，同样能很好地保留模型局部特征，且该算法可以根据实际模型的成型方向，实现分层方向的改变，保证成型零件的精度。     

电磁场作用下球形磁极辅助研磨弯管内表面研究

弯管弯曲成形后,在弯折处易产生微裂纹、褶皱等表面质量缺陷问题。本文通过采用六自由度机械手拖动电磁场发生装置沿加工轨迹往复运动,电磁场发生装置驱动球形辅助磁极绕管件内壁转动,实现了对弯管内表面的光整加工。在此基础上,通过对弯管轮廓采集及曲线拟合,重新构建了弯管中心线并转换为新的研磨加工轨迹。采用超景深3D电子显微镜和触针式表面粗糙度测量仪对研磨试验前后弯管内表面的形貌和粗糙度进行了对比分析。结果表明,通过重新构建研磨加工轨迹,试验装置有效解决了研磨弯折处的干涉与研磨不均匀等问题。研磨55 min后,表面粗糙度由原始的0.713μm降低到0.194μm,铜合金弯管内表面原始质量缺陷基本去除,表面纹理较为致密均匀。该方法有效避免了未规划研磨轨迹时出现的犁耕等纹理缺陷,提高了弯管的服役可靠性。     

射电望远镜主动面促动器的电磁辐射分析

主动面控制技术是当前大口径、高精度射电望远镜广泛使用的主动补偿技术,其包含的促动器在补偿面形精度的同时也辐射电磁波并影响射电天文观测。文中结合目前研究现状,对极低电磁辐射要求下的促动器进行辐射源分析,重点针对促动器控制板上信号建立数学模型,并选取晶振回路计算,合理设定印制板及器件的参数,通过Ansys 软件进行频域有限元分析,得到控制板晶振回路的辐射结果和规律。用近场测试验证了文中方法的有效性。该研究为促动器控制板的电磁兼容优化设计提供了验证方法,为降低主动面控制系统的电磁辐射奠定了基础。     

磨削表面粗糙度对γ-TiAl合金抗弯强度的影响

为了研究表面加工质量对硬脆性高温合金抗弯性能的影响,对不同磨削表面粗糙度的全片层γ-TiAl(Ti-47.5Al-2.5V-1.0Cr)合金进行了抗弯性能试验,分析了表面粗糙度对其抗弯强度的影响规律。试验结果表明,随着表面粗糙度的增大,全片层γ-TiAl合金的抗弯强度明显降低。结合断裂形貌图分析了全片层γ-TiAl合金组织中裂纹的萌生、扩展及最终发生宏观断裂的方式,全片层γ-TiAl合金裂纹大多起裂于因加工纹理引起的应力集中区域附近的片层间,并优先在层间扩展,最终的断裂形式多为穿层的脆性瞬断。